How To Set Hisense Dehumidifier

Hisense DH5022K1W 35-Pint 2-Speed Dehumidifier

Product Overview

Note:
The figures in this transmission are based on the external view of a standard model. They may differ from that dehumidifier you take selected

DEHUMIDIFIER Safety

Your safety and safety of others are very important
We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
Danger: A hazard that if not avoided, will result in death or serious injury.
Warning: A gamble that if not avoided, could event in expiry or serious injury.
All safety messages will tell you lot what the potential hazards are, tell you how to reduce the chance of injury and tell yous what can happen if the instructions are not followed.

IMPORTANT Prophylactic INSTRUCTIONS

Danger: To reduce the chance of explosion, fire, death, electric shock, scalding, or injury to persons when using this appliance, follow basic precautions, including the following:

INSTALLATION

Plug into a grounded 3 prong outlet. Do not remove ground prong.
Never attempt to operate this apparatus if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
Do not use an electrical adapter or multiple-outlet adaptors with this dehumidifier.
Exercise not use an extension string.
Unplug dehumidifier before servicing.
Exercise not drinkable h2o collected in the h2o bucket.
The apparatus is not intended for use by young children or impaired people without supervision, young children should exist supervised to ensure that they do not play with the appliance.
When installing or moving the apparatus, be careful not to compression, crush, or damage the power cord.
Keep packing materials out of the reach of children. Packaging material tin be dangerous for children. There is a risk of suffocation.
Do not utilise the appliance in standing water or allow the production to be directly splashed by water during use.
Store and install the appliance where it volition not be exposed to temperatures below freezing or exposed to outdoor conditions atmospheric condition.
Call an authorized service technician to repair or immediately replace all power cords that take become damaged. Exercise not use a cord that shows cracks or chafe damage along its length or at either end.
Do non use the product if the outlet is damaged or loose.
In the effect of a gas leak (propane gas, LP gas, etc.) exercise not operate this or any other appliance. Open up a window or door to ventilate the area immediately.
Do not disassemble, repair or modify the product.
Do not store or use flammable gases or materials near the dehumidifier.

Performance

Read all instructions before using the apparatus and salve these instructions.
Do not tamper with controls.
Push the ability plug all the way into the wall outlet so that it is not loose.
Do not grasp the ability cord or touch the appliance controls with wet hands.
Do not modify or extend the ability cord.
If the product makes a strange noise or emits a aroma or smoke, pull the ability plug out and contact Hisense customer service.
Avoid placing the dehumidifier or other heavy objects on elevation of the power cord.
Do non use water to clean the dehumidifier.
Keep the air inlet and outlet free from obstructions.
Do not embrace the power string with a rug or carpet. Placing heavy objects on acme of the cord could impairment it.
Keep the production abroad from fire and loftier heat.
Do not apply the product in places where it could be splashed by water.
Practise not insert fingers, sticks etc. into the air inlet or outlet. The fan is running at high speeds and could cause personal injuries.
Exercise not repair or replace any function of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this owner'due south manual. Use only authorized factory parts.
Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

A Alarm
To reduce the risk of injury to persons, malfunction, or harm to the product or property when using this apparatus, follow basic condom precautions, including the following:

INSTALLATION

Use this apparatus only for its intended purpose.
This production is non designed for preserving precision instruments, tableware or art works.
Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.
Practice not use the production in places where chemicals are used.
Chemicals and solvents dissolved in the air could cause production deformation and leaking,
Turn off the dehumidifier and pull out the power plug before cleaning.
Wait for the fan to cease moving.
Practise not operate the dehumidifier without a filter.
Using the product without a filter could issue in a reduced product lifespan, electrical stupor or injury.

OPERATION

Exercise not utilise the product for preserving animals/plants, precision instruments, art works etc.
Do not identify whatsoever objects on top of the dehumidifier.
Turn off the dehumidifier and empty the water bucket earlier moving the dehumidifier.
Pull out the power plug if you lot will non be using the product for an extended flow.
Do non use the product in a very small-scale infinite such every bit a cupboard.
Poor ventilation could result in overheating.
Do not use wax, thinner or a potent detergent when cleaning. Wipe the product using a soft cloth.
Practice non use the production in direct sunlight or rain.
Do not bear on the product with moisture hands.
Position the production on a firm, stable surface.
Remove cablevision ties and extend power string before use.
Do non spray foreign substances or water on the production.

STORAGE AND DISPOSING OF THE UNIT

Dispose of this appliance in accordance with Federal and Local regulations.
Refrigerants must be evacuated earlier disposal.
Please recycle or dispose of the packaging material of the product in an environment-friendly manner.
To avert damage to the compressor, never shop or ship the appliance upside down or sideways.

INSTALLATION REQUIREMENTS

Electrical Requirements
Specific electrical requirements are listed in the nautical chart below. Follow the requirements for the blazon of plug on the power supply cord.

Power Supply Requirements

Recommended Grounding Method
This dehumidifier must be grounded. This dehumidifier is equipped with a power supply cord with a iii-prong grounding plug. The cord must exist plugged into a mating, grounded iii-prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer'south responsibility to take a properly grounded three-prong outlet installed by a qualified electrician.

It is the customer'due south responsibility

To contact a qualified electrical installer.
To assure that the electric installation is adequate and conforms to the Nation Electrical Lawmaking, ANSI/NF PA seventy-final edition, and all local codes and ordinanc.

Location Requirements

Alarm To reduce the take chances of injury to persons, malfunction, or harm to the product or holding when using this appliance, follow basic safety precautions, including the following:
NOTE: Your model may differ from the one shown.

Do not locate outdoors. This dehumidifier is intended for indoor, residential apply only. This dehumidifier is not recommended for commercial apply.
Allow at least 12″ to 18″ (30.5 cm to 45. 7 cm) of space on the rear and sides of the dehumidifier for models with back louver and above the dehumidifier for models with superlative louvers.
You will demand a surface strong enough to support the dehumidifier when its bucket is full of water.
You will demand a surface level plenty to keep the water from spilling when the saucepan is full of water.
Do not cake the louvers of the unit .
Never operate this dehumidifier in an expanse that is likely to accrue standing water. If this condition develops, for your rubber disconnect the power supply before stepping into the h2o.

DEHUMIDIFIER Use

Control Console

NOTE:

Set indicate is Relative Humidity: lower is more dry out, higher is less dry.
The control panel of your model may differ from the one shown above.

Starting/Stopping the Dehumidifier

Notation:

Earlier turning on the dehumidifier, be sure that the bucket is empty and fits all the fashion into the dehumidifier.
Each time y'all unplug the dehumidifier or power is interrupted, the controls will return to the previous settings when power is restored.
Humidity displayed is between xxx% Relative Humidity and 90% Relative Humidity.
Humidity can exist set betwixt 30% Relative Humidity and 80% Relative Humidity.
Information technology's important to set up the desired humidity level to an achievable setting. To ensure free energyefficient operation, only utilize the dehumidifier in a closed space, with no open up windows or other sources of moist air (to avoid continuous running).
Operating temperature is between 38°F/RH60 % to 90°F/RH90%(3.2°C/RH60% to 32.2°C/RH xc%)At temperatures of 38°F(3.two°C) or less, water freezes inside the product. At temperatures over 90°F(32.2°C), the internal temperature of the production trips a protective device which deactivates the product to avert product impairment.
The compressor has a 3-infinitesimal delay before restarting. If the production is stopped and immediately restarted, to protect the compressor there is a 3-minute delay until the compressor restarts.
When the dehumidifier is operating, the indoor temperature will rise. The dehumidifier does not have a cooling /heating office. Heat is generated during operation, so the room temperature may be increased by most half-dozen ° F(3° C) depending on the usage conditions (indoor temperature, size of the room).

Plug into a grounded 3-prong outlet.
Printing POWER to turn on the dehumidifier.
Press FAN to choose the fan speed.
Press Style to choose the mode.
Press the plus or minus button to set the level of humidity.
Printing POWER to turn off the dehumidifier.

Notation:
In the upshot of a ability failure, your dehumidifier will operate at the previous settings when the ability is restored .

Fan Speed

Press FAN to select fan speed.
Choose Low, HIGH or Car.

LOW-Reach the desired humidity setting with lower sound level.
High-Will more than quickly accomplish the desired humidity setting.
Motorcar-Achieves set humidity at normal speed.

Note:
Once the relative humidity of the room hit the desired setting, the compressor will stop and the fan will exist off periodically. The fan may periodically turn on, to read the humidity level, without the compressor running.

Desired Humidity-Mode

Press Style to select the desired humidity setting.
Choose Auto Dry, Continuous or Manual Ready.

Auto DRY: The dehumidifier will operate in dry mode simply. The fan speed is set up automatically. The desired humidity is set to 50% automatically.
CONTINUOUS: The dehumidifier volition operated continuously. The fan speed can be adjusted. The desired humidity can not be adjusted.
MANUAL SET: The dehumidifier will operate at the selected fan speed to the fix humidity level. If the humidity level of the room is higher than the desired humidity setting, the compressor will turn on. If the humidity level of the room is lower than the desired humidity setting, the compressor will turn off, besides equally the fan.

NOTE:
The de-icing function will plow off the compressor if a low temperature status occurs. When the de-icer senses the correct operating temperature, the compressor volition cycle back on. Some freezing is normal when dehumidifiers are used at low temperatures.

Empty Bucket Light
If this light is on, the fan and the compressor will end running. This light indicates that you lot demand to check:

If the bucket is total, empty and re-install saucepan.
If the bucket is not in position, remove the bucket and re-install information technology. Make sure the bucket fits all the way into the dehumidifier and the bucket light is off, or dehumidifier will not run.

Power
Press POWER to turn on or turn off the dehumidifier.

Humidity Level

Printing the Plus or Minus button to set the desired humidity level. Desired humidity in the digital brandish volition flash for v seconds afterwards operation.
Actual room humidity will exist displayed after 5 seconds of flashing the desired humidity.

Notation:
Humidity can but be adapted manually in Manual Set up style. In Continuous and Auto Dry out manner, humidity level is set automatically.

Digital Display
Display shows relative humidity or time (depending on setting).

When the dehumidifier operates in Manual Gear up style, the display shows the relative humidity of the room.
When the timer is selected, the display shows the fourth dimension when the dehumidifier will turn on or turn off operates, depending on the setting.

NOTE:
The humidity displayed is only for reference. For accurate humidity, delight check a hygrometer.

Timer
To set Timer for a 30-minute to 24-hour delay before the dehumidifier is turned off {the dehumidifier must be On):

Press TIMER. Timer indicator low-cal volition come on, and the display volition flash. The display will bear witness remaining time before the dehumidifier will turn off.
Press the Plus or Minus push button to change the filibuster time, from 30 minutes to 24 hours.

To prepare Timer to plough on the dehumidifier, with previous setting:

Turn off the dehumidifier.
Press TIMER. Timer indicator light will flash. The display will bear witness remaining time earlier the dehumiditier will turn on.
Press the Plus or Minus button to change the filibuster time, from 30 minutes to 24 hours.

To clear the Timer filibuster program:
NOTE: Dehumiditier tin be either on or off.

Press TIMER once afterwards it has been programmed. Brandish will prove remaining time.
While the display is showing the remaining time, press TIMER again. Timer indicator lite will turn off.

To run across the remaining time.
Press TIMER once later on it has been programmed . Brandish will testify remaining time.
NOTE:
Empty the bleed water bucket before setting the timer function. If the water bucket becomes full during the Timer function, the Empty Bucket low-cal goes on and dehumidification stops.

Clean Filter

When the Clean Filter indicator light is on, remove, clean and replace the air filter. Come across "Cleaning the Air Filter".
Press the Clean Filter push button to reset the filter monitor.

Draining the Dehumidifier

Warning
Sickness Risk
Practice non drink water collected in water bucket. Doing and so tin outcome in sickness.

Selection 1 Bucket Draining
If a floor bleed is not available, or you practise non plan to run your dehumidifier continuously, you may want to simply empty the bucket.

Grasp the bucket sides to slide out bucket.
Lift the bucket up by the handle.
Pour h2o into a sink or tub.
Fold down the handle and reinstall the bucket.

Important:
If the Empty Bucket light comes on, the dehumidifier volition not operate. The bucket may need to be emptied or re-installed.
Annotation:

If the water bucket is removed immediately afterwards turning off the dehumidifier, the h2o remaining in the rut exchanger may drip inside the water bucket storage expanse. Remove the water with a soft cloth.
While cleaning, exercise not touch on the water level float.
Make clean the water bucket in one case a week during utilize.
If the ambient temperature is low, at that place is less wet in the air for the product to remove.
Unplug the production before removing the water bucket. If the bucket is removed while the product is operating, the compressor will terminate.

Choice two Gravity Draining
If you plan to run your dehumidifier continuously, you can choose direct draining by attaching a garden hose to the unit of measurement.

Plough off the dehumidifier and unplug the power supply string.
Uncover the connector encompass on the side of the unit.
Remove saucepan.
Adhere a garden hose to the drain hose connector on the inside of the dehumidifier. Securely adhere the hose to be sure there is no h2o leak.
Notation:
- The garden hose sold separately.
- And the drain hose inner diameter should greater than i /ii″.
- The connector is designed for N American garden hoses only.
  Of import:
  In Northward America the garden hose connectors are three/four″ bore direct (non-tapered) thread with a pitch of xi.v threads per inch (male part has an outer bore of 1 1/16 inches (26.99mm).
Place the other end of garden hose into a floor drain. Check to see that the hose lies flat and is in the bleed. Make sure all the parts of the hose is on a lower level than the hose connector on the dehumidifier.Also ,the outlet of the hose should at lest 5.5″ lower than the hose connector .The hose should not be kinked or pinched.
Reinstall bucket.

Annotation:

To use the saucepan without the garden hose, simply remove the garden hose, then reinstall bucket.
The bucket must exist installed and properly aligned for the dehumidifier to operate with or without a garden hose continued.

Normal Sounds

When your dehumidifier is operating normally, yous may hear sounds such as:

Compressor sounds, which may exist loud.
Air movement from the fan.
Clicking sounds when the dehumidifier or compressor turns on and off, and when the Automatic shut-off Switch is working.

DEHUMIDIFIER CARE

Your new dehumidifier is designed to give y'all many years of dependable service. This section explains how to clean and care for your dehumidifier. To avoid damage to the compressor, never store or ship the appliance upside down or sideways.

Cleaning the Air Filter
The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best operating efficiency. Check the filter every ii weeks to see whether it needs cleaning.

Turn off the dehumidifier.
Remove the air filter.
Use a vacuum cleaner to clean the air filter if the air filter is dingy, wash it in warm h2o with a mild detergent.
Reinstall the air filter.
Turn on the dehumidifier.

NOTE:
Do non launder air filter in the dishwasher or use any chemic cleaner. Air dry out filter completely before reinstalling to ensure maximum operating efficiency.

Cleaning the Dehumidifier

Exterior

Turn off the dehumidifier and unplug the power supply cord.
Grit the surface of the unit with a soft fabric or the dusting attachment of your vaccum cleaner.

Water Bucket
Every few weeks, rinse the inside of the water bucket with a mild detergent to avoid growth of mold, mildew and bacteria.

Water level float
The dehumidifier's water bucket has a water level float. Practice not harm or remove the saucepan's water level bladder. If the float is non properly in place, the Empty Bucket light will turn on, preventing operation, and could result in leaking.
Annotation:
Be sure the float is snapped correctly in place.

Problem SHOOTING

Earlier calling for service, attempt the suggestions below.

Dehumidifier will not run

Is the dehumidifier turned on?Plough on the dehumidifier.
WARNING Electrical Shock Hazard
- Plug into a grounded 3-prong outlet.
- Do not remove basis prong.
- Practise non use an adapter.
- Do non apply an extension cord.
- Failure to follow these instructions can result in death, fire or electrical shock.
- If the SUPPLY String is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a run a risk"
Is the power cord plugged into a grounded thursday ree-p rang outlet?
Plug into a grounded three-prong outlet. See "Electrical Requirements" on page five.
Has a housed concord fuse blown or has a circuit breaker tripped?
Replace the fuse or reset the circuit breaker. If the problem continues, phone call an electrician. Run across "Electrical Requirements" on page 5.
Is the bucket installed properly?
Reinstall the saucepan and so that it fits all the mode into the dehumidifier.
Does the bucket need to be emptied?
Empty the bucket.
Is the h2o level float in place?
Remove the bucket. Make sure the bladder is snapped in place. Reinstall the bucket.
Did the dehumidifier all of a sudden stop operating, and won't plow on?
Confirm the ability is connected, and the saucepan is in place. If the unit of measurement still doesn't operate, call Hisense for Warranty service.

Dehumidifier runs but does not dehumidify

All models accept an automatic de-icing function that will shut off the compressor and allow the fan to run. When the de-icing function senses the correct operating temperature, the compressor will cycle back on.
The filter is muddy or obstructed debris. Clean the filter.

Air coming from the dehumidifier is warm
Dehumidifier volition put out warm air under normal operating conditions.

Dehumidifier displays error codes
If the dehumidifier displays an error lawmaking, please contact Hisense customer service.

CIRCUIT DIAGRAM

Ezoic

Documents / Resource

Source: https://manuals.plus/hisense/dh5022k1w-35-pint-2-speed-dehumidifier-manual